Larsen Fire Valve Cabinets

By /

Model VC1818 and VC2626 SERIES

TO SPECIFY THE VC1818 and VC2626 SERIES Download: Valve Cabinet Submittal

  1. Insert, after “VC,” the appropriate prefix for the trim and door material.
    • S – Steel
    • AL – Aluminum
    • SS – Stainless Steel
    • B – Brass
    • BZ – Bronze
  2. Select the required model number from the table below.
  3. Select cabinet series and insert series code before the model number. 

Select the door style from the illustrations.

The VC2626 Series is designed specifically to meet fire codes which require the continuous revolution of a 12″ long spanner wrench.

For a complete list of models and dimensions please download the Valve Cabinet Submittal form.

Model VC4016 and VC3616 SERIES

Larsen’s exclusive VC4016 and VC3616 Series provide an attractive, innovative, and economical method of housing a fire extinguisher and a fire department valve. Both the VC4016 and VC3616 support the extinguisher with a heavy gauge shelf. The shelf in both units is located 12″ up from the bottom of the cabinet, leaving approximately 28″ for the extinguisher height in the VC4016 and 24″ in the VC3616.

A more economical option is available for both units. As pictured at the left, the shelf can be deleted with the valve installed at the top of the cabinet. With this option, the “F” dimension for the knockout location (see chart at left) is measured from the top of the cabinet. To specify this unit, see below.

TO SPECIFY THE VC4016 and VC3616 SERIES Download: Valve Cabinet Submittal

  1. Insert, after “VC,” the appropriate prefix for the trim and door material 
    • S – Steel
    • AL – Aluminum
    • SS – Stainless Steel
    • B – Brass
    • BZ – Bronze
  2. Select the required model number from the table below.
  3. Select cabinet series and insert series code before the model number. 
  4. Select the door style from the illustrations.
  5. If the shelf is to be deleted with the valve installed at the top, insert the prefix “T” before “VC” and note the appropriate knockout location.

For a complete list of models and dimensions please download the Valve Cabinet Submittal form.