B.L. Wilcox - Claridge Thinline Vertical Sliding Units

Claridge Thinline Vertical Sliding Units

Specify number of sliding panels after model #: -1 for 1 sliding panel; -2 for 2 sliding panels or -3 for 3 sliding panels

Features

Sliding panels are counter-balanced by lead weights to eliminate racking; panels move smoothly over roller bearing sheaves in the channel guides.
Maximum travel of sliding panel is approximately equal to panel’s overall height.
Housing and trim are satin anodized aluminum
Two-panel housing is 4-7/8” deep; face is 2-5/8” wide.

Options

Approved shop drawings required.
Prices are based on porcelain enamel steel markerboard sliding panels and back panel; satin anodize finish aluminum frame and housing
For Vitracite, specify and add $1.06 per sq. ft.; for Claridge cork, Hook-Fab, Designer Fabric, or Fabricork, specify and add $2.50 per sq. ft.; for Flexible Matte White Projection Screen, add $29.00 per sq. ft.; for Tan Nucork, DEDUCT $3.46 per sq. ft.; and for units with no back panel, DEDUCT $8.06 per sq. ft.
For Medium or Dark Bronze Anodize finish on 1-panel Thinline units, add $678.00; on 2-panel units, add $1086.00; and on 3-panel units add $1500.00.
For Powder Coat finish on 1-panel Thinline units, add $384.00; on 2-panel units, add $600.00 and on 3-panel units, add $711.00.
When kick panels are required, for Fabricork, add $6.68 per sq. ft. and for lowpressure laminate in oak or walnut grain, add $4.06 per sq. ft.